mail archive LIRC mailing list
lirc-list.lists.sourceforge.net
(List home) (Recent threads) (66 other SourceForge lists)
Subscription Options
- RSS or Atom: Read-only subscription using a browser or aggregator. This is the recommended way if you don't need to send messages to the list. You can learn more about feed syndication and clients here.
- Conventional: All messages are delivered to your mail address, and you can reply. To subscribe, send an email to the list's subscribe address with "subscribe" in the subject line, or visit the list's homepage here.
- Low traffic list: less than 3 messages per day
- This list contains about 3,683 messages, beginning Aug 2009
- 1 messages added yesterday
LIRC mailing list
Recent threads
G V — 136921877322 May 2013
Hi, I want to build the serial receiver that's on http://www.lirc.org/receivers.html, but I wanted to know how it needs to be modified to use the ...
Ido Admon — 136863537915 May 2013
hello list, i'm trying to get lirc working with iguanaworks serial ir transceiver (http://iguanaworks.net/products/series-transc...), but failing ...
Julien Chevet — 136863465615 May 2013
Hello, I have some problems using an USB IR Blaster with the ftdi driver of Lirc. Here is my system config : - Linux NeoLex 3.8.0-19-generic #30-Ubunt...
Julien Chevet — 136863413115 May 2013
[ArchiveOrange]: There doesn't seem to be anything here...
Julien Chevet — 136852955814 May 2013*
Hello, Here comes an IR code in hexa recorded by an IR-PRO device (http://www.rticorp.com/products/IRPRO.html) 0000 006D 0000 0024 0156 00A9 0016 0014...
Remote AND transmitter with lircd 0.9.0 (2 Replies)
Don Doumakes — 136831636611 May 2013*
I could use some help getting my MythTV over what I think is the last hurdle. My hardware.conf is below. As written, I have a remote that works perfec...
Irrecord with Hama MCE Remote receiver (2 Replies)
Julien Chevet — 136818129710 May 2013*
Hello, I would like to know if it's possible to use irrecord to make a Lirc config file with a Hama MCE Remote receiver. And if yes, is it possibl...
sibu — 136795447907 May 2013
Greetings, I would like to know if lirc operates over ipv6 networks and whether there are compile switches to compile lirc for ipv6 usage. Thanks in a...
Krister Hallergard — 136792825207 May 2013
Had another look at the events as per "cat /proc/bus/input/devices" and discovered event15: I: Bus=0000 Vendor=0000 Product=0000 Version=000...
Krister Hallergard — 136792825007 May 2013
After upgrading from openSUSE 12.2 to 13.3 I often have problems starting lirc. I have concluded that it has to do with the event used: ls -l /dev/inp...
Omer Enbar — 136749783602 May 2013*
Hey, I've been trying for some while now to get lirc working with my air condition unit (remote control RC-4(HL)) without success. The remote does...
praet0ri4n — 136718200628 Apr 2013
Hi all, I'm struggling with an old TV capture card Asus MyCinema Analog P7131, which has a IR receiver plug. I'm not using it's tv functio...
Multiple LIRC Instances in systemd Service (6 Replies)
doa379 — 136615711817 Apr 2013*
I'm trying to run multiple LIRC instances (one for each device) in a systemd service. This is the error I'm getting: lircd: could not assign a...
othellodreams — 136610368416 Apr 2013*
Dear LIRC-Community, i want to use lirc on openwrt, but since a half a year or so, i do have serious problems while compiling it. I opened a thread he...
Question: (1 Reply)
Jim Van Wie — 136605094615 Apr 2013*
Hi, 1st post here. I am wanting to control my Echostar(2700) receiver with my computer(IBM600e). This computer has a built in IR. Will this software L...
othellodreams — 136603235615 Apr 2013
Dear LIRC-Community, i want to use lirc on openwrt, but since a half a year or so, i do have serious problems while compiling it. I opened a thread he...
Iv — 136596004914 Apr 2013
Hi, I'm trying since a while to make my pc remote control working on my debian 6. I've a custom kernel (3.8.7 .config here <http://mei.mooo...
FTDI Driver with an IRBLASTER (3 Replies)
Steve Zawadzski — 136538475508 Apr 2013*
Hey Guys, I bought a USB IRBLASTER from irblaster.info. It uses the FT232RL chip. I was abe to get ir working with the ftdi driver accessing it with l...
Benjamin Kraus — 136535253507 Apr 2013
I believe I have found a bug in 'daemons/hw_ftdi.c'. Line 440 should read: pulsewidth = f_sample * ((__u64) (pulse & PULSE_MASK)) / 100000...
Anirban Chatterjee — 136446899528 Mar 2013*
Hi, My problem is when I am issuing the command "irsend LIST "" "" ", it returns nothing. Ideally it should have returne...