ArchiveOrangemail archive

MPlayer usage questions, feature requests, bug reports


mplayer-users.mplayerhq.hu
(List home) (Recent threads) (26 other MPlayer lists)

Subscription Options

  • RSS or Atom: Read-only subscription using a browser or aggregator. This is the recommended way if you don't need to send messages to the list. You can learn more about feed syndication and clients here.
  • Conventional: All messages are delivered to your mail address, and you can reply. To subscribe, send an email to the list's subscribe address with "subscribe" in the subject line, or visit the list's homepage here.
  • Low traffic list: less than 3 messages per day
  • This list contains about 86,110 messages, beginning Dec 2000
  • 1 messages added yesterday
Report the Spam
This button sends a spam report to the moderator. Please use it sparingly. For other removal requests, read this.
Are you sure? yes no

MPlayer interrupted by signal 6 in module: decode_video

Ad
<Rashmi.Nivarthy — 1340550784Sun, 24 Jun 2012 15:13:04 +0000 (UTC) 
Dear Felix/Ryan,

Our intension is to make mplayer run without X-libraries .

We  have compiled Mplayer  from the source version :

Mplayer-1.0rc3final.dfsg1  for  debain version 5.0.8.

We have SDL library :libSDL-1.2

FreeDb version: directfb-1.2-9-pure

We have compiled the sources using above library versions/

When we ran mplayer , the application is crashing.

Below is the crash report:

mplayer -vo sdl /mnt/pools/A/A0/Movies/video1.avi

mplayer: /mnt/apps/lib/libjpeg.so.62: no version information available
(required by mplayer)

Warning unknown option stop-xscreensaver at line 88

MPlayer 1.0rc3-4.4.5 (C) 2000-2009 MPlayer Team

Playing /mnt/pools/A/A0/Movies/video1.avi.

AVI file format detected.

[aviheader] Video stream found, -vid 0

[aviheader] Audio stream found, -aid 1

Detected NON-INTERLEAVED AVI file format.

VIDEO:  [cvid]  320x240  24bpp  15.000 fps  1236.7 kbps (151.0 kbyte/s)

commandline read: mplayer

commandline read: -vo

commandline read: sdl

commandline read: /mnt/pools/A/A0/Movies/video1.avi

   ~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.10++
|~~~~~~~~~~~~~~~~~~~~~~~~~

        (c) 2007-2009  Intel Corporation

        (c) 2001-2008  The world wide DirectFB Open Source Community

        (c) 2000-2004  Convergence (integrated media) GmbH----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2011-06-09 00:06)

(*) IntelCE/Systems: Available GDL driver memory:  65MB of 70MB

(*) Direct/Thread: Started 'Hotplug with Linux Input' (11172) [INPUT
OTHER/OTHER 0/0] <8388608>...

(*) DirectFB/Input: Hotplug detecting enabled with Linux Input Driver

(*) Direct/Thread: Started 'Linux Input' (11173) [INPUT OTHER/OTHER 0/0]
<8388608>...

(*) DirectFB/Input: Philips RCMM Remote Control (1) 0.1 (directfb.org)

(*) Direct/Thread: Started 'Linux Input' (11174) [INPUT OTHER/OTHER 0/0]
<8388608>...

(*) DirectFB/Input: Philips RCMM Mouse (2) 0.1 (directfb.org)

(*) Direct/Thread: Started 'Linux Input' (11175) [INPUT OTHER/OTHER 0/0]
<8388608>...

(*) DirectFB/Input: Philips RCMM keyboard for jv4 (3) 0.1 (directfb.org)

(*) Direct/Thread: Started 'Linux Input' (11176) [INPUT OTHER/OTHER 0/0]
<8388608>...

(*) DirectFB/Input: Reboot Control (4) 0.1 (directfb.org)

(*) DirectFB/Genefx: MMX detected and enabled

(*) IntelCE/GfxDriver: Using OpenGL ES 1.1 graphics library

(*) IntelCE/GfxDriver: Using SRB graphics library

(*) DirectFB/Graphics: Intel Corporation Intel_CE Graphics Driver  2.0
(Intel Corporation)

(*) DirectFB/Core/WM: Default 0.3 (directfb.org)

[VO_SDL] Using driver: directf.

========================================================================
==

Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family

Selected video codec: [ffcvid] vfm: ffmpeg (FFmpeg Cinepak Video)

========================================================================
==

========================================================================
==

Opening audio decoder: [pcm] Uncompressed PCM audio decoder

AUDIO: 22050 Hz, 1 ch, u8, 176.4 kbit/100.00% (ratio: 22050->22050)

Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)

========================================================================
==

[AO SDL] Samplerate: 22050Hz Channels: Mono Format u8

[AO SDL] using esd audio driver.

[AO SDL] Unable to open audio: No available audio device

Failed to initialize audio driver 'sdl:esd'

Could not open/initialize audio device -> no sound.

Audio: no sound

Starting playback...

VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12)

VDec: using Planar YV12 as output csp (no 0)

Movie-Aspect is undefined - no prescaling applied.

VO: [sdl] 320x240 => 320x240 Planar YV12

(!) [11167:    0.000] --> Caught signal 11 (at 0x6, invalid address) <--

(!!!)  *** WARNING [still 1 objects in pool:'Layer Region Pool'] ***
[object.c:359 in fusion_object_pool_destroy()]

(!!!)  *** WARNING [still 1 objects in pool:'Layer Context Pool'] ***
[object.c:359 in fusion_object_pool_destroy()]

MPlayer interrupted by signal 6 in module: decode_video

- MPlayer crashed. This shouldn't happen.

  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your

  gcc version. If you think it's MPlayer's fault, please read

  DOCS/HTML/en/bugreports.html and follow the instructions there. We
can't and

  won't help unless you provide this information when reporting a
possible bug.

[ This binary of MPlayer in Debian is currently compiled with

   '--enable-debug'; the debugging symbols are in the package

   'mplayer-dbg'.]

GDB Crassh Dump:

(*) DirectFB/Core/WM: Default 0.3 (directfb.org)

[VO_SDL] Using driver: directf.

========================================================================
==

Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family

Selected video codec: [ffcvid] vfm: ffmpeg (FFmpeg Cinepak Video)

========================================================================
==

========================================================================
==

Opening audio decoder: [pcm] Uncompressed PCM audio decoder

AUDIO: 22050 Hz, 1 ch, u8, 176.4 kbit/100.00% (ratio: 22050->22050)

Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)

========================================================================
==

[AO SDL] Samplerate: 22050Hz Channels: Mono Format u8

[AO SDL] using esd audio driver.

[AO SDL] Unable to open audio: No available audio device

Failed to initialize audio driver 'sdl:esd'

Could not open/initialize audio device -> no sound.

Audio: no sound

Starting playback...

VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12)

VDec: using Planar YV12 as output csp (no 0)

Movie-Aspect is undefined - no prescaling applied.

VO: [sdl] 320x240 => 320x240 Planar YV12

Program received signal SIGSEGV, Segmentation fault.

[Switching to Thread 0xb6b026d0 (LWP 11292)]

0x080c2da3 in set_fullmode (mode=-2) at libvo/vo_sdl.c:637

637     libvo/vo_sdl.c: No such file or directory.

        in libvo/vo_sdl.c

(gdb) bt

#0  0x080c2da3 in set_fullmode (mode=-2) at libvo/vo_sdl.c:637

#1  0x080c45c0 in config (width=320, height=240, d_width=320,
d_height=240,

    flags=<value optimized out>, title=0x85cb97a "MPlayer",
format=842094169)

    at libvo/vo_sdl.c:843

#2  0x080b4b29 in config_video_out (vo=0x85cf6e0, width=320, height=240,

    d_width=320, d_height=240, flags=0, title=0x85cb97a "MPlayer",

    format=842094169) at libvo/video_out.c:352

#3  0x08142a13 in config (vf=0x8bc1538, width=320, height=240,
d_width=320,

    d_height=240, flags=0, outfmt=842094169) at libmpcodecs/vf_vo.c:67

#4  0x08119ec3 in vf_config_wrapper (vf=0x8bc1538, width=0, height=1,

    d_width=320, d_height=240, flags=0, outfmt=842094169)

    at libmpcodecs/vf.c:643

#5  0x08118065 in mpcodecs_config_vo (sh=0x8b99c10, w=320, h=240,

    preferred_outfmt=842094169) at libmpcodecs/vd.c:310

#6  0x081eb1c8 in init_vo (sh=0x8b99c10, pix_fmt=<value optimized out>)

    at libmpcodecs/vd_ffmpeg.c:521

#7  0x081eba35 in get_buffer (avctx=0x8bc1860, pic=0x8bc1bd4)

    at libmpcodecs/vd_ffmpeg.c:569

#8  0x08333ede in cinepak_decode_frame (avctx=0x8bc1860, data=0x8bc1780,

    data_size=0xbff829fc, buf=0x8b9be98 "", buf_size=22960) at
cinepak.c:424

#9  0x082f7a5c in avcodec_decode_video (avctx=0x8bc1860,
picture=0x8bc1780,

    got_picture_ptr=0xbff829fc, buf=0x8b9be98 "", buf_size=22960)

    at utils.c:542

---Type <return> to continue, or q <return> to quit---

#10 0x081eb35c in decode (sh=0x8b99c10, data=0x8b9be98, len=22960,

    flags=<value optimized out>) at libmpcodecs/vd_ffmpeg.c:781

#11 0x08112a57 in decode_video (sh_video=0x8b99c10, start=0x8b9be98 "",

    in_size=22960, drop_frame=0, pts=0) at libmpcodecs/dec_video.c:369

#12 0x080a48c3 in main (argc=5, argv=0xbff83bc4) at mplayer.c:2291

Please let us if we are doing something wrong , in the way we need use
mplayer.

We need your help in fixing this issue.

Thanks,

Rashmi
Carl Eugen Hoyos — 1340606172Mon, 25 Jun 2012 06:36:12 +0000 (UTC) 
<Rashmi.Nivarthy <at> emc.com> writes:

> MPlayer 1.0rc3-4.4.5 (C) 2000-2009 MPlayer TeamThis is antique, please test current svn head.

Carl Eugen
<Rashmi.Nivarthy — 1340610005Mon, 25 Jun 2012 07:40:05 +0000 (UTC) 
Latest versions of sources , work with higher versions of Directfb, but in our enviromnet we are using directfb-1.2.x , if we have to upgrade directfb we need to upgrade  other dependent libraries too..
So can u please let us know was there a fix for this version?

-----Original Message-----
From:   On Behalf Of Carl Eugen Hoyos
Sent: Monday, June 25, 2012 12:06 PM
To: 
Subject: Re: [MPlayer-users]MPlayer interrupted by signal 6 in module: decode_video<Rashmi.Nivarthy <at> emc.com> writes:

> MPlayer 1.0rc3-4.4.5 (C) 2000-2009 MPlayer TeamThis is antique, please test current svn head.

Carl Eugen_______________________________________________
MPlayer-users mailing list

https://lists.mplayerhq.hu/mailman/listinfo/m...
Carl Eugen Hoyos — 1340628207Mon, 25 Jun 2012 12:43:27 +0000 (UTC) 
<Rashmi.Nivarthy <at> emc.com> writes:

> Latest versions of sources , work with higher versions of DirectfbYour bug report is about SDL, so DirectFb should not matter.
Or do I miss something?

Please do not top-post here, Carl Eugen
Home | About | Privacy